ISE Sensor for Fluoride (F-)

ISE Sensor for Fluoride (F-)

Features:

  • Used in strong acid fluoride etching service at elevated temperatures up to 70 degrees Celsius
  • Undergo strong acid cleaning to remove calcium and silicate deposits
  • Suitable for acid fluoride metal etching process measurement or fluoride wastewater treatment systems.
  • Ready for immersion installation standard or fully submersible with insertion tube or waterproofing (optional)
  • RADEL with Double O-Ring Front End — ¾” MNPT Back End
  • Hot-tap insertion valve retractable assembly (up to 10 psi); or
  • Sanitary assembly and tri clover fitting (up to 10 psi)
  • Acid/Fluoride Resistant
  • Sulphide Resistant
  • Slurry Resistant (High Abrasion)
  • High Capacity KYNAR Reference (HDPE for ultralow option)
  • Proprietary toughened glass
  • Sensor holder and valve retractable assembly sold separately
  • Digital smart sensor technology (optional)
    • No hard wiring – plug-n-play connectivity
    • Sensor stores calibration data, analyser configuration and sensor history
    • Hot-swap for quick sensor change-out
    • No interaction with analyser – sensor data auto uploads
Thefluoride-ise-270×334 Turtle Tough Fluoride ion selective electrode is a solid-state fluoride mono-crystal and conductive-polymer reference system that allows for extremely low cost-of-ownership without any costly reagents or sample conditioning. It is the ONLY Fluoride (F-) ion selective sensor that can be used in strong acid fluoride etching service at elevated temperatures up to 70 degrees Celsius and can undergo strong acid cleaning to remove calcium and silicate deposits. It is also suitable for acid fluoride metal etching process measurement, or fluoride wastewater treatment systems. Turtle Tough provide an unrivalled and proven solution for Fluoride measurement. The ISE sensor is capable of measuring from 0.019 to 19,000 ppm (1X10-6 to 1.0 Molar) and its lowest limit of detection is 0.001 ppm (5X10-8 Molar). It will operate over a broad pH range from 2.5 to 11. For applications where the pH is above 8.0, a pH sensor is added to the analyser to provide compensation of both pH and temperature. The sum of the measured unbound ammonium ions and dissolved ammonia gas formed must be computed as a function of both real-time continuous pH & temperature parameters. Our valve refluoride_ion_selective_ise_sensortractable sensor is uniquely designed to interface with both our hot-tap insertion valve retractable assembly or our sanitary fitting. Our hot-tap assemblies are a common feature in industries where direct access to the process is required inline or in-tank without interruption to service. Shown LEFT in full submersible configuration. Digital Smart Sensor Technology (DSST) This sensor is available with our digital smart sensor technology. This plug and play sensor has a quick connect fitting, eliminating the need for hard wiring to the analyser. On-board sensor memory allows the storage of calibration data, analyser configurations and sensor service history. This allows the sensor to be conveniently maintained and calibrated off-site or in the laboratory and pre-programmed with calibration data and analyser configurations. This stored information automatically uploads to the analyser upon connection and eliminates the need for any interaction with the analyser, greatly simplifying the change-out of sensors. A service log stored on the sensors is ideal for maintenance and quality assurance records. TTMA-multichannel-analyser-3 270x334Analyser The TT-GP-F-6008 interfaces with the TT-MA or TT-MAD ISE Modular Analysers. The unique modular design enables you to create a fully functional, multi-parameter analyser with any combination of different TT-MA analytical modules. The TT-MA and MAD Analyser modules have the following features: Scale 4-20mA analogue output is standard for all measurement modules. Active 4-20mA can support remote external displays to allow for viewing measured values in control panels, secondary field locations, or instrumentation shops. Modbus digital output optional. Precise factory-calibrated linear analogue output allows excellent use in control applications. All analogue outputs have built-in trim calibration support, including both offset and span adjustments. Calibration of temperature compensation element is available for all measurement modules. Economical Custom Configurations offer the freedom to pay only for the specific modules you need; pH, ORP, Dissolved Oxygen, Ion Selective (ISE) and temperature. Easy to use simple and intuitive three-button operation with no complex codes to memorize for most day-to-day tasks. Easy to read displays with bright three-digit LED displays are visible even in bright sunlight and do not suffer from the common problems associated with LCD displays, such as environmental fatigue and wear. Weatherproof NEMA 4X CSA/UL rated & IP65 enclosures include high quality sealing cable glands that are ideal for weatherproof sealing on sensor, power, and output cables. Power supply is CSA/UL/CE approved universal 100 to 240 VAC 50/60 Hz power supply module for line powered operation, or 3-wire 24VDC powered operation.